Click for larger view

Need to remove the fittings from your drums or barrels?  This is the tool.  It even has a large 1 1/2" hex nut type opening for loosening fittings of that size.

• Removes a variety of bung sizes and fittings
• Even has a 1 1/2" hex nut socket type opening
• Offset handle reduces user stress and protects knuckles
• Non-sparking cast aluminum construction

This is a very high grade ½” x 260" yellow teflon tape.  The same stuff we use to build all of our processors

• Meets and is marked Mil Spec T-27730A * 

• Meets and is marked with U/L approval * 

• Manufactured in an ISO 9002 manufacturing facility

Actual timer not shown. 

Actual timer looks almost exactly like this, but is a 4 hour timer.

Perfect for controlling your processor pump.  You can set it for any time from 1-4 hours and it will shut your pump off for you.  Mounted in a wall panel this could also be used to control other devices like your bubbler pump, etc.

TIMER: COMMERCIAL; ALUMINUM PLATE, WHITE KNOB; TIME CYCLE 4 HR; OPERATION TYPE WITHOUT HOLD; SPST SWITCH; CONTACT CURRENT 20 AMPERE AT 125 VAC 50/60 HZ, 10 AMPERE AT 250/277 VAC 50/60 HZ, 7 AMPERE AT 125 VAC (TUNGSTEN) 

Perfect for installing your processor pump timer in.  Has 3 3/4" threaded openings making it easy to install on a threaded pipe, etc.  Comes with threaded plugs for the remaining openings.  Very sturdy. 

These are actually 32 oz bottles which equals .95 liters, so they work for liter size bottles.

These are great for making a small test batch of biodiesel as they are crystal clear, allowing you to easily see what's happening inside.  They are also good for making up your liter batch of reference solution.  We use these all the time.  You'll even see them in our photo gallery as we collect samples in them for pictures and future reference.  Comes with a lid.

Bottles are lightweight and made tough to be virtually unbreakable. Great for a variety of uses and applications.

In case you didn't know it, the catalyst (Lye or KOH) is VERY hygroscopic meaning it will absorb a lot of moisture rapidly.  This can quickly ruin your catalyst.  Left exposed for only a very short time it can absorb so much moisture that it forms water droplets.  

Made of Heavy duty, high density polyethylene construction these create a leak-proof airtight seal. Simply tap on the adapter with a rubber mallet (includes rubber gasket) and screw inner cover on. Fits 3.5 to 6 gallon plastic pails.  If you buy your catalyst in 50lb bags, try finding 3.5 gallon buckets as 2 of those hold the catalyst best.  You want minimal air in the buckets to avoid moisture absorption.  Then just use 1 until it's empty.  This keeps one totally sealed and dry.

If you're storing 50lb bags of catalyst, you need these.  Comes with an adapter ring & the screw on lid, in various colors. (no bucket included)

Actual mister in use

This is the same mister we now use on all of our biodiesel processors.  This mister is really great for mist washing your biodiesel.  Here's some reasons why:

• It's Brass, so it wont rust
• This one head puts out as much as 4-5 of the Arizona Mister type heads
• Because it uses only 1 mister, the opening is larger so it rarely clogs
• Easier to install
• Less parts to break
• No plastic hoses or fittings to crack or break

Design Features

• High energy efficiency
• One-piece, compact construction
• No whirl vanes or internal parts
• 1/4" male connection

• Finest fog of any direct pressure nozzle
• Produces high percentage of droplets under 50 microns

NOTE: Use only Stainless, brass or plastic fittings inline with this head.  Using metal anywhere inline will cause the metal to rust and the mist head to clog.

Here's what one customer said about our new misters:

"Hey Guy, I have used the new mister head and it works great since there is no nozzles blowing off or hoses to separate.  Joe"

Same as above, but with a brass, 3/4" x 1/4" adapter included. 

(new version has our Logo embroidered on it)

Size Large.  Click the images for a larger view. 

This is our Deluxe, Embroidered Lab coat.  This high quality cloth lab coat comes to about your knees and buttons up the front.  Cooler & more comfortable than a rubber apron, Tyvek labcoat, or other forms of protection.  Why do you think doctors & lab guys wear them.  Try one, you'll like it.

Basic Air Bubbler kit

Allows you to bubble wash your fuel for a more thorough cleaning process.  Includes air pump with dual outlets and a variable flow rate, air line & wooden air bubbler.

Comes with the same air pump as above, but with a flexible, circular air bubbler (6" diameter), AND a Much Improved air bubbler hose (8 ft long).  The standard air hose above, which is the same thing everyone else sells, works.  But after just 4-5 batches the hose starts to harden and gets very stiff, requiring frequent replacement.  Although they don't cost much, it's a hassle. 

In the Deluxe Air bubbler kit we include an air line that will last at least 10 times as long, maybe indefinitely.  We haven't had one break down yet.

Comes with 8 ft of the premium air bubbler line and the circular air bubbler described above, but NO Air Bubbler Pump.

Includes air pump with dual outlets and a variable flow rate.  This pump is perfect for batch sizes up to 80 gallon.

Drum Band Heater -

Here's a simple way to heat your oil.  To use this heater simply wrap it around your STEEL barrel, then plug it into the wall outlet, set the thermostat and you're oil will begin heating.

Note: these can be stacked to decrease overall heating time if desired.

This is an open topped 210 gallon polyethylene drying tank.  This is a little quicker to dry in since you can dry up to about 160 gallons at once. 

Note: closed tank inside the open tank is not included.

   Back to top